UNIK-11
     
 
NTAplus with FAX, Internet Access, POTS, and Remote Powering/Management


The Most Powerful and Cost-Effective ISDN Solution


NTAplus supports the analog POTS ports, Internet access, G3 FAX and Remote management functions. It provides a complete solution for data, voice and FAX communication for SOHO at a minimal equipment investment cost. Its low power consumption can survive at remote powering condition. Remote F/W upgrade and configuration minimize the maintenance expense of telephone companies.


Internet Access
It supports the high speed Internet access by Async-to-Sync PPP (or Multilink PPP) conversion. Bandwidth management schemes are supported. Advanced AO/DI is also available.
Telephone Ports
There are 2 analog ports for telephone sets, answering machines, FAX machines or PBX. Advanced features are supported for the analog ports, such as Call Waiting, Hold, Transfer, 3-party Conference, and Internal calls.
Remote Management
Remote F/W download make it possible to upgrade the service and function. Remote Configuration can also reduce the maintenance expense.
  SPECIFICATIONS
NETWORK CONNECTION
  • ISDN U Interface
  • Comply with ETSI ETR 080
  • Line Code: 2B1Q, Echo Cancellation
  • Switch Compatibility: EURO ISDN DSS1
  • Connector: RJ11
S/T INTERFACE DROP
  • Comply with I.430
  • Connector: RJ45 x 2
  • Support Point-to-Point, Short Passive Bus
  • Power Source 1: Normal Mode (Max 4 Watts), and Programmable at Remote Power Mode.
DATA INTERFACE (V.24)
  • Connector: DB9
  • Data Rate: Up to 230.4 Kbs
  • Dialing Interface: AT Command, DTR Assertion
  • Data Protocols: Async-to-Sync PPP and Multilink PPP, V.120
  • Dynamic Bandwidth Allocation (Multilink PPP)
  • BACP and BAP (Multilink PPP)
  • BAP and CHAP with ISP Server
  • AO/DI Upgradable
ANALOG PORTS
  • Port Number: 2
  • Connector: RJ11 (RJ12)
  • Daling: DTMF(PB) or Pulse
  • REN: 2
  • Polarity Reversal
  • Caller ID Interface
  • MSN
  • Keypad Protocol Support
  • Internal Calls
  • Selectable Overlap/Enbloc Sending
  • Configuration by Tone Command
  • Prioritized Port Selection for Incoming Calls
  • Supplementary Services: CLIP/CLIR, Call Hold, Waiting, Transfer, 3-party Conference, Forwarding
CONFIGURATION
  • GUI Configuration S/W Support
  • Configuration via Data Port
  • Remote Configuration via ISDN Network
  • Telephone Sets
G3 FAX (OPTIONAL)
  • Compatible with RVS-COM Fax Software
  • Work with Group 3 Fax Machines
F/W UPGRADABLE
  • F/W Upgraded Easily via Data Port
  • Loaded by X-Modem, No OS Platform Constraint
  • Remote F/W Upgrade (Optional)
DISPLAY (LED)
  • Power
  • Line
  • Ports Status(Telephone and Data)
  • 128Kbps
  • Mode
POWER
  • External AC Adapter
  • Input: 230¡Ó10% VAC; Output: 24 VAC, 300mA
  • Remote Power Feeding
  • Power Consumption:
    < 4 Watts at Fully Operation,
    <1.8 Watts at One Voice Connection at Remote Power Operation
ENVIRONMENTAL AND SAFETY
  • Operation Temperature: 0 ~ 40 ¢XC
  • Relative Humidity: 10 ~ 90% Non-condensing
  • Comply with CISPR 22
  • Comply with IEC 950
PHYSICAL
  • Dimension: 178mm (W) x 136mm (D) x 35mm (H)
  • Weight: < 700g
  • Suitable for Installation on Desktop, Wall-Mount
 
     
 
Copyright ©SendTek Corporation. All rights reserved