CET-330
     
 
Cable Extreme Utilization
Plug & Play With Coaxial Cable
A Compact HCNA Coaxial LAN Adapter
Providing You a Powerful Broadband Connection
  INTRODUCTION
The HomePNA3.1 Coax Ethernet Bridge, CET-330, Enables You to Set-up
Your Private Network at Home with Your Existing Coaxial Cable.
 
No Additional Network Wiring is Necessary. You may just Find a Coax
Connector in the Wall, Put the Coaxial Plug into the Connector, You
Can then be Ready to Access the Broadband Internet.
No Extra Utility is Needed. No Setting, just Link. Simply Plug & Play.
 
Via the RJ-45 Ethernet Ports, You can Connect CET-330 with the
Ethernet -Interfaced Devices such as STB, Camera Server, PC, or
Switch/Hub. The High Speed of 128Mbps will Bring You to Enjoy the
Video-On-Demand(VOD) or Multimedia-On-Demand(MOD) Services.
 
With CET-330, SOHO can Even Quickly Extend or Flexibly Change the
Existing LAN Environment. No Re-wiring more.
  FEATURES
  • 128Mbps HCNA Coax Port as Home Network Backbone by Using Existing Coaxial Cable
  • Two 10/100M Fast Ethernet Ports for FTTx, DSL/Cable Modem, and Ethernet Terminals, Like STB, PC...
  • Distance up to 4000 Feet Over RG59 Wires
  • Filter Build-in to Eliminate Noise from TV
  • QoS Priority and Mapping Support
  • Plug & Play
  • Compact Size Design
  SPECIFICATIONS
Network Standards
  • HomePNA 3.0 over Coaxial Cable (HCNA)
  • IEEE802.3
  • IEEE802.3u
  • IEEE802.3x
Connectors
  • Ethernet : Two RJ-45 Ports
  • HCNA : Two F-Type Female Coax Connectors, One for HCNA, the Other One for TV.
Transmission Power/Spectrum
  • 0 +/- 1dBm / 4~20MHz
Transmission Speed/Distance
  • Up to 128Mbps
  • Up to 4000 Feet(-176dBm/Hz Noise Floor)
Quality of Service
  • Priority Queue based on IEEE802.1p and IP TOS
  • TAG VLAN Pass Through
  • Quaranteed QoS based on HomePNA 3.0 Parameterized QoS
Fast Ethernet Interface
  • 10/100Mbps
  • MDI/MDI-X Auto Crossover
DIP Switch
  • To Select the Master of Sync Mode Operation
Indicators
  • "Power" LED
  • Ethernet "Link/Activity" LED x 2
  • HCNA "Link/Activity" LED
  • "SyncMode" LED
Power Requirement
  • External Power Supply : 5VDC
  • Power Consumption < 5Watt
EMI/EMC
  • Comply with FCC Part15
  • Comply with CE
  • Comply with UL/cUL and CSA
 
Environmental Conditions
  • Operating Temperature : 0 C ~ 40 C (32 F ~ 104 F)
  • Storage Temperature : -10 C ~ 65 C (14 F ~ 149 F)
  • Operating Humidity : 10% ~ 95%, Non-Condensing
Physical Dimension
  • 114mm (W) x 67mm (D) x 25mm (H)
Unit Weight
  • 120g
 
     
 
Copyright ©SendTek Corporation. All rights reserved