|
|
|
|
| |
|
|
| |
HCNA 802.11g ADSL2+ Firewall Router  
Access Internet with ADSL2+/ADSL2/ADSL  
Use In-Building Coaxial Cable for High Speed Home Networking  
802.11g/802.11b Wireless AP with WPA/WEP Support  
Firewall Security with SPI and DoS Prevention
Traffic Prioritization and Bandwidth Management for QoS  
Quick Installation and Auto-scan ADSL Settings  
Ideal for Home and SOHO Users
|
|
IPTV through ADSL2+/HCNA/802.11g:
Comply with ADSL2+/ADSL2/ADSL worldwide standards,
as well as ADSL2+/ADSL2 Annex A+M.
Downstream rate up to 24/12/8 Mbps and Upstream rate up to 1 Mbps.
With integrated 54Mbps 802.11g Access Point, brings users the mobility.
Through HCNA (HomePNA3 over Coax) port, users enjoy
IPTV service and high-speed Internet services in every room by
using existing coax cable without new wiring.  
Fast and Responsive Net Connection:
Quality of Service (QoS) by prioritizing outgoing data traffic and
by throttling the inbound/outbound transmission speed.
No blocking/saturating bandwidth for important traffic.  
Robust Firewall Security:
Built-in NAT natural firewall and advanced hacker pattern-filtering.
Support Stateful Packet Inspection (SPI).
Prevent Denial of Service (DoS) attacks. |
|
- ADSL2+/ADSL2/ADSL for Internet Access
- Build the Home Networking LAN by Using Existing Coaxial Cable
- Built-in 4-port 10/100Mbps Fast Ethernet Switch
- Support Wireless 802.11g/b
- Multi-Protocol to Establish WAN Connections
- Universal Plug and Play (UPnP)
- NAT/DNS Relay/DDNS/DHCP/Virtual Server/RIP1,2/SNMP
- Firewall Security for Dos/SPI/Packet Filtering
- Rich QoS Features
- Web based GUI Configuration through LAN or WAN
- Firmware Upgradeable
- Firmware Upgrade for HCNA End-Points(EP)
- Diagnosis for HCNA EP
|
|
ADSL Compliance
- ADSL2+ : G.dmt.bisplus(ITU G.992.5),
Annex M(ITU G.992.5) --Available for Annex A+M model only
- ADSL2 : G.dmt.bis(ITU G.992.3), Annex M
- ADSL : Full rate ANSI T1.413 Issue 2
G.dmt(ITU G.992.1), G.hs(ITU G.994.1)
ADSL over ISDN/U-R2
ATM and PPP Protocols
- ATM Adaptation Layer Type 5 (AAL5)
- Multiple Protocol over AAL5 (RFC2684, formerly RFC1483)
- Bridged or Routed Ethernet Encapsulation
- VC and LLC based Multiplexing
- PPP over Ethernet (PPPoE)
- PPP over ATM (RFC2364)
- Classical IP over ATM (RFC1577)
- MAC Encapsulated Routing (RFC1483 MER)
- OAM F4/F5
Wireless 802.11g
- Compliant with IEEE 802.11g and 802.11b
- 2.4 GHz ¡V 2.484G Hz Frequency Range
- Data Rate: Up to 54Mbps
- Support 64/128 bits WEP
- Support WPA
HCNA (HPNA3 over Coax) Compliance
- Spectrum: 4-20MHz
- Transmission Power: 0 +/-1 dBm
- Data Rate: Up to 128Mbps
- Distance: up to 4000 Feet(-176dBm/Hz Noise Floor)
Connectors
- WAN : One RJ-11 ADSL Port
- LAN Wireless : One Detachable Antenna Port
- LAN Ethernet : Four 10/100M Auto Crossover(MDI/MDI-X) Ports
- LAN HCNA : Two F-Type Female Coax Connectors.
One for HCNA, the Other for TV.
Network Protocols and Features
- NAT, Static Routing and RIP-1/2
- Universal Plug and Play (UPnP) Compliant
- Dynamic Domain Name System (DDNS)
- Virtual Server and DMZ
- SNTP, DNS Relay and IGMP Proxy
- POP3 (Email Account Checking)
- IGMP Snooping for Video Service
- DHCP Server/Client/Relay
Firewall
- Built-in NAT Firewall
- Stateful Packet Inspection (SPI)
- Prevent DoS Attacks including IP Spoofing,
Land Attack, Smurf Attack, Ping of Death, TCP SYN Flooding, etc.
- Packet Filtering ¡V Port/Source IP/Destination IP/MAC Address
- URL Content Filtering ¡V String/Domain Name Detection in URL
Quality of Service
- Support DiffServ Approach
- Traffic Prioritization and Bandwidth Management based on
IP Protocol, Port Number and Address
- Quaranteed QoS based on HomePNA3.1 Parameterized QoS
Management
- Quick Installation Wizard and Auto-Scan ADSL Settings
- Web based GUI for Remote and Local Management
- Firmware Upgrade and Configuration Data Backup/Restore
- Diagnosis of HCNA Interface
- Firmware Upgrade for HCNA End-Points(EP)
- Embedded Telnet Server
- Available Syslog Monitoring
- TR-069 Compliant for Remote Management
- SNMP v3, MIB-I/MIB-II Support
Reset Button
Indicators
- "PWR" Power LED
- "SYS" System Status LED
- "Link/Act", "SyncMode" LEDs for HCNA
- "LAN1", "LAN2", "LAN3", "LAN4" LEDs for Ethernet
- "ADSL" ADSL Line Status LED
- "Internet" PPPoE/PPPoA/Email LED
Power
- One Power Switch : Power On/Off
- One Power Jack : 12V DC, 1.0A
- Power Consumption < 12 Watt
EMI/EMC
- Comply with FCC Part15
- Comply with CE
Environmental Conditions
- Operating Temperature : 0¢J ~ 40¢J (32¢K ~ 104¢K)
- Storage Temperature : -10¢J ~ 65¢J (14¢K ~ 149¢K)
- Operating Humidity : 10% ~ 95%, Non-condensing
Physical Dimension
- 210mm (W) x 148mm (D) x 36mm (H)
Unit Weight
|
|
|
|
| |
|
|
|
| |
 |
|
Copyright ©SendTek Corporation. All rights reserved |
|
|
|